Review Phiston Technologies' documentation...
The Phiston MediaVise Compact Digial Media Sanitizer unit is capable of physically destroying many different digital storage devices such as Hard Drives (3.5" and 2.5" varieties), cell phones and a variety of other media. The MediaVise Compact is designed to use the power of hydraulics with our patented Sanitizer Plate design to efficiently and quickly dispose of any data you don't want falling into the wrong hands. With a process time of just under a minute, your information and security is safe with your new MediaVise Compact.
Feed Information:
The MediaVise Compact is designed to be an industrial level Data Sanitizer. Because of this caution must always be taken when feeding in hard drives.
Hard Drives
To feed properly, place 1/4 of the hard drive into the feed slot (or until Hard Drive is being held by locking doors) and place your palm on the end of the exposed hard drive. Push down until the drive falls through the locking doors. At this time the MediaVise Compact is ready to begin its operation.
Cell Phones and other bulky media
For Cellular phones and other bulky media, under 4" x 1" x 5.75", follow the same procedure as for Hard Drives. Please load only one cellular phone at a time into the sanitation slot. Loading more than one may overload the slot and cause unwanted results.
** Explosion Alert **
LI-ION Batteries commonly used in cellular phones may explode during a destruction operation. When able, please remove any battery from devices before inserting them into the MediaVise Compact as a precaution.
** Safety Alert **
Always use caution when loading any items into the MediaVise Compact. This device is made from Steel and may have sharp edges.
 |
Cell Phone Destroyed after processed through MediaVise Compact
|
 |
Hard Drive Destroyed
|
 |
More hard drives destroyed
|
 |
Palm Media Device destroyed
|
 |
Small Hard Drives destroyed
|
|
MediaVise Compact |
| Media Supported (Partial List) |
3.5" Hard Disk Drive 2.5" Hard Drive Disk Cell Phones (Under Maximum Media Size) DLT and LTO Tapes Any Media under the Maximum Media Size (not guaranteed for total sanitation) |
| Full Cycle Time |
30 seconds (Doubles the number of hard drives that can be destroyed from 60 to 120 per hour) |
| Maximum Media Size |
4" x 1.25" x 5.75" |
| Voltage |
120 +/- 10% Volt, 60 Hz - American |
| Maximum Current |
13 Amperes at 120 Volts. |
| Cord Specifications |
6 Feet @ 15 Amps |
| Hydraulic Fluid Specifications |
SAE Grade: 10 Viscosity Grade: 32 Viscosity SUS @ 100F: 165 Flash Point: 395 degrees F. Pour Point: -10 degrees F. Volume: 1L |
|
Issued a patent, U.S. Patent No. 7,975,950, on July 12, 2011 |
| Machine Dimensions |
22.5'' length x 9.75'' width x 20.6'' height |
| Shipping Dimensions |
30'' length x 22'' width x 15'' height |
| Actual Weight |
132 pounds |
| Shipping Weight |
150 pounds | |
What sets the MediaVise? Compact apart?
- Complete warping of the hard drive and all of its internals, including the storage platters.
- Machines that only "fold" hard drives actually leave a lot of the surface area on a platter intact. The more intact platters remain, the greater the possibility that data can be recovered from the drive through forensic methods. The MediaVise Compact's patented crushing plates specifically targets the entirety of the platters, leaving them completely warped and unrecoverable.
- Many of the machines that "fold" or "punch" a hard drive deliver a relatively low amount of crushing force. The lower the crushing force, the more likely that the hard drive may not be completely warped. Currently, a machine cannot be found in the market that delivers more than 18,000 lbs. of force, except for the MediaVise Compact. The MediaVise Compact manages to deliver an astounding 40,000 lbs. of force to a hard drive, leaving it completely mangled and destroyed.
- The only hassle free automated system.
- All other destroyers in the market need "adapters" in order to complete their job. Users have to specially position their hard drives into these adapters in order commence the destruction process. The MediaVise Compact was specifically designed to avoid special alignment or adapters. Users simply need to insert their media into the machine without any special positioning to worry about, and run the destruction process.
- In other machines, after each destroyed drive, users have to manually remove the drive from the adapter which sometimes means having to pry it out. This is an issue because destroyed hard drives can have sharp edges or broken materials that can cause injury to the user.The MediaVise Compact was created with the user's safety in mind. With the MediaVise Compact's collection drawer, no interaction is ever needed with the destroyed drives, thus keeping the user safe from potential injury.
- Almost every desktop size destroyer requires removing destroyed hard drives before destroying a second one. This quickly becomes a hassle and a waste of useful time. The MediaVise Compact's collection drawer, however, allows a user to destroy several hard drives (7- 10 desktop hard drives) before having to worry about removal of destroyed media or disposal, thereby saving the user time while making the process easier.
- Unlike most of the other machines, the MediaVise Compact's drawer bin catches all debris and particles. Ceramic platters from laptop hard drives and some desktop hard drives may require a messy cleanup on other devices. However, the MediaVise Compact's drawer bin would eliminate this task, or any cleanup, completely.
- The NSA is currently testing the MediaVise Compact for approval.
- If approved, the MediaVise Compact will be the first hard drive destruction device to have the NSA seal.
Limited Warranty
Subject to the exclusions contained below, Phiston Technologies, Inc. warrants its Data Destruction Product Line ("Products"), Phiston branded or certified accessories sold for use with these Products ("Accessories") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty
Length of Coverage
Products as defined above:
Ninety (90) days parts and labor. One (1) year parts from the date of purchase by the original consumer purchaser of the product.
Accessories as defined above:
Ninety (90) days parts and labor. One (1) year parts from the date of purchase by the original consumer purchaser of the product.
Conditions
The manufacturer's products are warranted to be free of defects in materials and craftsmanship under normal use for as long as they are owned by the original purchaser, subject to the exclusions and limitations described below. This warranty does not cover ordinary wear and tear, overloading, modifications of any kind including repairs or attempted repairs by parties other than the manufacturer or its Authorized Service Technicians, incorrect fluid, and/or use in a manner for which they are not intended or use which is contrary to instructions clearly stated in this product manual. This warranty is limited to new products sold through the Manufacturer's Authorized Distributors and the Original Equipment Manufacturer. Electronic products and components are warranted against defects in material and craftsmanship for a period of one year from the date of original purchase. All costs for parts and labor incurred for the first ninety (90) days after purchase will be covered by the manufacturer under this warranty. All costs for parts will be covered for one (1) year.